7/16" x 20 UNF CS Thin Wall Bondsert Kit
Part number: 3334-7/16TWK
7/16-20 Carbon Steel Thin Wall Insert Kit - includes Drill, Tap, Drive Tool and Inserts
| Part no. | Title | Qty |
|---|---|---|
| 3632-33/64 | 33/64" Drill for UNC & UNF Lokserts | 1 |
| 3632-33/64 | 33/64" Drill for UNC & UNF Lokserts | 1 |
| 3632-33/64 | 33/64" Drill for UNC & UNF Lokserts | 1 |
| 3632-9/16I | 9/16 X 12 Intermediate Tap for UNC & UNF Lokserts | 1 |
| 3632-9/16I | 9/16 X 12 Intermediate Tap for UNC & UNF Lokserts | 1 |
| 3632-9/16I | 9/16 X 12 Intermediate Tap for UNC & UNF Lokserts | 1 |
| 3300-6 | Bondsert Drive Tool #6 | 1 |
| Part No. | 3334-7/16TWK |
| Barcode | 9326518153870 |
| Kit Type | 7/16-20 Carbon Steel Thin Wall Insert Kit - includes Drill, Tap, Drive Tool and Inserts |
| Internal Thread | 7/16-20 |
| External Thread | 9/16-12 |
| Insert Material | C12L14 Carbon Steel |
Bondsert Threaded Inserts provide a stronger fastener assembly in soft materials such as aluminum, magnesium and even cast iron. They can be used for repairing stripped threads, and for use in creating stronger threads in original equipment.
External threads are manufactured with standard size and pitch to permit the use of standard drills and taps. The inserts can be installed with a screwdriver, bolt/jam nut, or power drive tool.
Bondsert Threaded Inserts are vibration resistant. Within minutes of installation, the Loctite™ 204 adhesive begins to set, and the newly installed inserts are fastener-ready within 5 minutes and will not back out. In addition, the Loctite™ 204 adhesive seals against liquids and gases up to 6,000 psi when fully cured after 72 hours.